Pioneer DEH-345R Manual De Operación página 18

Using RDS Functions
PI Seek function
The tuner searches for another frequency broadcasting
the same programing. "PI SEEK" appears on the
display and the radio volume is muted during a PI
Seek. The muting is discontinued after completion of
the PI Seek, whether or not the PI seek has succeded. If
the PI seek is unsuccessful, the tuner retums to the
previous frequency.
Auto PI Seek
Tf the tuner fails to locate a suitable alternative
frequency or the broadcasting signal is too weak for
proper reception, the PI Seek will automatically start.
Preset Station P! Seek
When preset stations cannot be recalled, as
when traveling long distances, the unit can be
set to perform PI Seek also during preset recall.
The default setting for PI Seek is OFF.
¢ To switch PI Seek ON, hold down button 2
while turning the ignition key from OFF
(Lock) to ON (ACC),
To switch PI Seek OFF, repeat the preceding
operation.
REG Function
When AF is used to retune the tuner automatically,
REG (regional) limits the selection to stations
broadcasting regional programming.
Activating/Deactivating REG
The REG function can be turned ON or OFF
independently for each FM band.
¢ To activate REG, press the AF button for 2
seconds or longer in an FM band.
The "REG" indicator lights.
* To exit the REG mode, press the AF button
for 2 seconds or longer again.
The "REG" indicator is extinguished.
Notes:
1. Regional programming and regional networks are
organized differently depending on the country (i.e.,
they may change according to the hour, state or
broadcast area).
2. The preset number may disappear on the
display if the tuner tunes in a regional station
18 which differs from the originally set station.