Pioneer DEH-345R Manual De Operación página 23

>TY Alarm
PTY Alarm is a special PTY code for
announcements regarding emergencies such as
natural disasters. When the tuner receives the
radio alarm code, "ALARM" appears on the
display and the volume adjusts to the TA
volume. When the station stops broadcasting the
emergency announcement, the system returns to
the previous source.
Notes:
1. Only the (+), (-), TA, AF and SOURCE
buttons can be used during emergency
announcement reception.
2. The system switches back to the original
source following emergency announcement
reception.
3. The PTY Alarm function is not activated in
the built-in CD player mode if the tuner was
last set to the MW/LW band.
Canceling Emergency Announcements
¢ Press the TA button during emergency
announcement reception to cancel the
announcement and return to the original
source.
Tuning Step Adjustment
Normally set at 50 kHz during Seek tuning in
the FM mode, the tuning step changes to
100 kHz when the AF or TA mode is activated.
In some countries it may be preferable to set
tuning step to 50 kHz in the AF mode.
¢ Turn the ignition from OFF (Lock) to ON
(ACC) while holding down button 1.
Notes:
1. The tuning step remains set at 50 kHz during
Manual tuning.
2. The tuning step returns to 100 kHz if the
battery is temporarily disconnected.
23
HSITDNA