ENGLISH (Translated from original language)
5.4.
Producing hot water
You can prepare as many different portions of hot water as there are groups on the machine..
1. Press the hot water key once for a single portion, or twice for a double portion of water. The key stays
lit during the production and the display shows the symbol for water production.
2. When the limit for the preset time for the water production is reached, the production stops
automatically. The display continues to show the symbol for water production for another 5 seconds.
3. In order to interrupt the production, press any key of the keyboard of the active group.
5.5.
Producing steam
Danger of burning and scalding! The dispensed steam is very hot.
After each steam production, activate the steam wand for another 2-3 seconds in order to clean the
wand's inside
Clean the wand with a damp cloth after each utilization.
In order to produce steam, the water/ steam boiler must have reached its final functioning
temperature (ca. 122º).
In order to produce steam, turn the corresponding knob for steam production.
In order to stop steam production, close the knob.
OPTIONAL TURBO STEAM
The Compass MB is available with the TURBO STEAM optional that provides assisted steam
production
Machines with Turbo Steam feature two Turbo-Steam-buttons on the left side (see image below).
You can choose between two different types of steam: Normal steam and steam with air injection
(for assisted production of milk foam)
In order to produce normal steam, press key
In order to produce steam with air injection, press key
6. Portion Programming
The programming of drink portions, hot water and steam temperature works via simulation.
All settings programmed on group 1 (leftmost group) are automatically transferred to the other
groups. However, it is possible to program each group separately.
During the programming of one group, all other groups, as well as the water and steam production,
are blocked.
Espresso Coffee Machines Compass MB by fiamma
49