HOMCOM 800-155V70 Manual De Instrucciones página 7

Place the appliance near a wall, ensuring the distance is between 50-75mm.
FIRST USE
Before use, remove all packaging, including the bottom cushion, foam pads
and rubber belts from the refrigerator.
Adjust the feet, then wipe the inside and outside of the refrigerator with a soft
cloth.
Once set up, wait 2-6 hours before using the appliance - do not start
immediately.
To prevent damaging the power cord, ensure it is not covered by the
refrigerator or other objects. Before switching on the refrigerator, ensure its
voltage matches the power supply.
When first installed, allow the appliance to drop to a normal operating
temperature before filling with fresh or frozen goods - this could take 2-3
hours.
TEST
Clean the refrigerator with a soft, damp cloth or with a neutral detergent and
clean water, then wipe dry.
Notes: Electric parts can only by wiped with a dry cloth - do not use water or
other liquids.
Turn the thermostat knob to '3' and turn on the electricity. The compressor
inside the refrigerator will begin to work.
Close the door and wait 30 minutes - if the temperature in the freezer
compartment decreases quickly, it shows the refrigerator system works
properly.
When the refrigerator is used for long periods, the controller will automatically
set the temperature (this will only happen if the door is not being opened
frequently).
30cm
50-75cm
30cm
7