5
- In versions with 1 or 2 MDF covers, position the cover(s) (B) on the rods align-
ing with the pre-existing holes at the base of the cover and fix the screws by using a
Phillips head screwdriver. Manually fit the tray(s) (C) into the assembled frame
LIMPEZA E MANUTENÇÃO
Do not use metal spatulas, brushes, and cleaning agents such as alcohol, acetone,
kerosene, gasoline, bleach, thinner, solvents, varsol, vinegar, or other chemical or abra-
sive products such as sandpaper or wire brushes. For easy cleaning, use a solution of
warm water with mild soap and then dry thoroughly. If chemicals reach the upholstery,
clean it immediately, preventing the products from staining or drying out the fabric. The
plastic parts cannot be washed with hot water. Chrome-plated metal components can
be cleaned with soft, dry flannel, and silicone-based automotive wax can be used to
increase shine and durability, in which case perform the task following the wax manu-
facturer's instructions. Carry out a periodic cleaning; the dust, accumulated over time,
affects the product's beauty, making it difficult to clean the next one.
ESPAÑOL
LUGAR DE INSTALACIÓN
Instalar el producto Dompel en un lugar nivelado, sin ranuras ni enmiendas, evitando el
movimiento de balanceo y vibración. El lugar debe ser aireado, sin incidencia de la luz
directa de los rayos solares y que esté alejado de fuentes de calor (cocinas, estufas,
etc.) y productos inflamables. No instalar el producto al aire libre.
SEGURIDAD
Evitar accidentes. Después de desembalar el producto, mantener el material del envase
fuera del alcance de los niños.