Tangent spectrum square Manual Del Usuario página 16

en
This loudness mode rebalances our auditory perception by reducing mid-range frequen-
cies via DSP, producing a highly musical sound result at low levels.
Removing the loudspeaker from the Shelf
The Tangent Spectrum Square loudspeaker has been specially designed to fit perfectly
into IKEA ® Kallax and IKEA
plied rubber pads (recommended), removing the loudspeaker may require careful han-
dling.
Here's how it works :
• Carefully remove the fabric grille.
• Carefully pull the loudspeaker straight out from the vents (take care not to touch the
loudspeaker diaphragms and domes).
• Finally, grasp the loudspeaker by its outer edges to remove it completely from the
shelf.
Important Safety Instructions
We recommend that you fully plug in your product before connecting it to the mains.
Handle the power cord with care. When unplugging the power cord from an outlet, do so
by pulling on the plug, not the cable. If you are not going to use this unit for a long time,
unplug it from the mains.
• Read these instructions carefully.
• Keep this manual in a safe place.
• Heed all warnings.
• Follow instructions carefully.
• Avoid using this product near water.
• Clean only with a dry cloth.
• Install in accordance with manufacturer's instructions.
• Avoid proximity to heat sources, such as radiators, heat registers, stoves or other
heat-producing appliances.
Spectrum Square
® Expedit shelving compartments. Once installed with the sup-
This product was designed according to rigorous norms
and complies with safety standards. It should only be used
under normal conditions as described below. Check the
power supply voltage before connecting it to the mains.
This product has been designed to operate in various
countries.
16