Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT SPECIFICATIONS
Motor ............................................................................................................................................................................4 V DC
No Load Speed (revolutions per minute) ...................................................approx. 175/min (RPM) Low, 300/min (RPM) Max
Waterproof Rating .......................................................................................................................................................... IPX7*
* IP Rating: Specifies the environmental protection the product enclosure provides. This product has an IPX7 rating meaning it can withstand immersion
in water up to 1 meter for up to 30 minutes.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance.
WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always remove battery pack from the tool when you are
assembling parts, making adjustments, cleaning, or when
not in use. Removing battery pack will prevent accidental
starting that could cause serious personal injury.
WARNING:
Do not use any attachments or accessories not recom-
mended by the manufacturer of this product. The use of
attachments or accessories not recommended can result
in serious personal injury.
APPLICATIONS
You may use this product for the purposes listed below:
„ The power scrubber can be used to clean exterior and
interior surfaces.
„ This product is not for commercial use.
FEATURES
ASSEMBLY
WARNING:
Do not attempt to modify this product or create accesso-
ries or attachments not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to
possible serious personal injury.
OPERATION
WARNING:
Battery tools are always in operating condition. Make sure
the power button is off and remove the battery pack when
the product is not in use or when carrying at your side.
INSTALLING/REMOVING BATTERY PACK
See Figure 1, page 8.
To install:
„ Unscrew and remove the battery cap.
„ Insert the battery pack into the product as shown.
„ Place the cap over the battery pack and push down until
the cap meets the threads at the end of the tool.
„ Screw the cap on securely.
NOTE: Do not attempt to use this product if the battery
cap is not securely closed. The cap is securely closed
when the alignment triangle on the tool lines up with the
alignment rectangle on the cap.
To remove:
„ Unscrew and remove the battery cap.
„ Remove the battery pack from the tool.
For complete charging instructions, see the operator's manual
for your battery pack.
5 — English
Publicidad
