Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Please read and follow all of the instructions & safety precautions detailed below prior to using this
product. Failure to do so may result in serious personal injury and / or property damage.
Do not expose this product to heat sources (including open flame or direct sunlight)
Do not expose this product to water or liquids. If liquid enters the product, immediately unplug
the product from any connected power sources or devices.
Do not disassemble or modify the product
Avoid dropping this product (or any other heavy impact which might damage the internal
circuit)
In the unlikely event of any abnormalities (such as strange odor, overheating, leaking, color
change, etc.),discontinue use immediately.
Avoid cleaning this product using liquids or chemical substances (use dry cloth only)
Only use attachments/accessories specified by the manufacturer
Dispose of this item properly (do not dispose of it in trash receptacles and do not attempt to
incinerate it)
Do not leave this product unattended while it is in use or while it is being charged
This product is not a toy: KEEP AWAY FROM CHILDREN
Only re-charge this device using a USB port wall adapter (not included)
Do not re-charge via USB port on a computer
Do not use this product while it is being charged
When not being used for prolonged periods of time please charge every 3 months to avoid
damaging the battery
The T246 is a Wireless 2.1 + EDR speaker with FM radio and a TF card reader. Please see below
user instructions.
T246 Specifications
Battery Type: Grade A lithium-ion rechargeable battery
Battery Duration/Lifespan: 300 times
Capacity: 400 mAh
Power Input & Current: 5V/500mAh
Sound Output: 3W x 1
Sensitivity: 65dB
Frequency Response: 280HZ-16KHZ
Distortion Rate: 1%
WARNING
Safety Precautions
T246 User Manual

Publicidad

loading

Resumen de contenidos para Spector&Co T246

  • Página 1 When not being used for prolonged periods of time please charge every 3 months to avoid damaging the battery T246 User Manual The T246 is a Wireless 2.1 + EDR speaker with FM radio and a TF card reader. Please see below user instructions. T246 Specifications...
  • Página 2 Wireless pairing) 2. Enable Bluetooth function on your electronic device. 3. Search Bluetooth signal Spector T246 & pair your device (Blue LED on T246 will remain lit to indicate the devices are paired) Wireless Mode 1.
  • Página 3 5. Press on card to eject To Charge the T246 1. Insert micro USB into the T246 & connect the USB output to a wall adapter (not included) 2. Red LED indicates the device is charging (Red LED will turn OFF once fully charged) FCC STATEMENT This device complies with Part 15 of the FCC Rules.
  • Página 4 éviter d’endommager la batterie. Manuel de l’utilisateur du T246 Le T246 est un haut-parleur sans fil 2.1+ EDR avec radio FM radio et lecteur de carte TF. Veuillez lire ci-dessous les spécifications du produit et le mode d’emploi.
  • Página 5 *** 1. Allumer: Interrupteur ON/OFF position ON 2. Une fois que le T246 est allumé, il est automatiquement en mode SANS FIL NOTE: Les dispositifs appairés préalablement s’apparieront automatiquement avec le haut parleur T246 3. Appuyer sur le bouton M UNE FOIS pour passer du mode Sans Fil en mode Radio FM, appuyer DEUX FOIS pour passer en mode AUX 4.
  • Página 6 5. Presser sur la carte pour la faire sortir. Chargement du T246 3. Insérer micro USB dans le T246 et connecter la sortie USB à un adaptateur de prise murale (non inclus). 4. LED rouge signale que le dispositif est en cours de chargement (LED rouge s’éteindra une fois le chargement terminé).
  • Página 7 Si el producto no se utiliza por largos periodos de tiempo, hay que cargarlo cada 3 meses para evitar dañar la batería. Manual del usuario del T246 El T246 es un parlante inalámbrico 2.1+ EDR con radio FM radio y lector de tarjeta TF. Sírvase leer a continuación las especificaciones e instrucciones del producto. Especificaciones del T246 Tipo de batería: Polímero de litio recargable grado A...
  • Página 8 Azul parpadeará rápidamente para señalar que el parlante está listo para apareamiento inalámbrico. 2. Activar la función Bluetooth en el dispositivo electrónico. 3. Buscar la señal Bluetooth Spector T246 y aparear el dispositivo (LED Azul en el T246 permanecerá encendida para señalar que los dispositivos están apareados). Modo inalámbrico 1.
  • Página 9 5. Presionar sobre la tarjeta para eyectarla. Carga del T246 1. Insertar micro USB en el T246 y conectar la salida USB a una adoptador de toma de corriente mural (no incluido). 2. LED roja señala que el dispositivo se está cargando (LED roja se apagará un vez terminada la carga.