Spector&Co T246 Manual Del Usuario página 2

Wireless Version: 2.1 + EDR
Range of Wireless Communication: 10M
Charge Time (0-100%): 2 hours
Playback Time: Up to 4 hours
Accessories: AUX audio cable & Micro USB charging cable
Product Size: 4 ¼" 2 1/8" x 1 3/8"
Net Weight: 177g
T246 Operation
*** NOTE: REMOVE BATTERY STOPPER PRIOR TO USE (PULL ON PLASTIC TAB) ***
1. On: switch ON/OFF switch to ON
2. Once T246 has been turned ON, it is automatically in WIRELESS mode NOTE: previously
paired devices will automatically connect to the T246 speaker
3. Press M button ONCE to switch from Wireless to FM radio mode, press TWICE to switch to
AUX mode
4. Off: press down on the speaker case until it locks back
Wireless Pairing
1. OnceT246 has been turned on, it is automatically WIRELESS mode (Blue LED will flash
quickly to indicate the speaker is ready for Wireless pairing)
2. Enable Bluetooth function on your electronic device.
3. Search Bluetooth signal Spector T246 & pair your device (Blue LED on T246 will remain lit
to indicate the devices are paired)
Wireless Mode
1. Play/Pause/Answer & End incoming call: press play/pause button
2. Volume control: press & hold +/- buttons
3. Skip songs: press skip buttons quickly
FM Radio mode
1. To activate FM radio turn speaker ON & Press M button once
2. NOTE: Plug in the micro-USB/USB cable while in FM radio mode. The cable will act as an
antenna and will improve the radio signal.
3. Press play/pause button to initiate the scan of all accessible FM radio stations
4. Once initial scan is complete use "+"/"-": quick press to scan radio stations/ Hold down for
volume control
Aux Mode
1. To activate AUX mode turn speaker ON & press M button twice
2. Plug in 3.5mm AUX audio cable into the T246 & into your audio device
3. Play/Pause can be adjusted on the speaker
4. Skipping songs & volume control must be controlled directly on your audio device
5. Press Play/Pause button to answer/end incoming call
TF Card Mode
1. TF Card: Insert your TF card & music will automatically begin playing