Publicidad
Idiomas disponibles
Idiomas disponibles
4. Pull the vacuum cleaner waste container out of the
device.
5. Empty the vacuum cleaner waste container.
DANGER
Tipping the waste container while transporting it
Tipping the waste container while transporting it can
lead to injuries.
The vacuum material container can be lifted by cranes
at the handle. The maximum load for crane transport is
50 kg.
Be aware of the permissible total weight of the waste
container when transporting it with a crane and adhere
to the applicable legal regulations.
Inserting the dust bag
Insert the dust bag:
1. Apply the parking brake.
2. Unlock and lower the container.
3. Pull out the container by the handle.
4. Insert the dust bag. Take care to ensure that the dust
bag sits close to the container wall and base.
5. Pull the edge of the dust collection bag over the
edge of the vacuum cleaner waste container.
6. Fit and lock the container.
Removing the dust bag
1. Apply the parking brake.
2. Unlock and lower the container.
3. Switch on the device to avoid releasing dangerous
dusts.
4. Pull out the container by the handle.
5. Pull the dust bag upwards.
6. Seal the dust bag tightly with the closing strip under-
neath the opening.
7. Dispose of the dust bag in accordance with statutory
regulations.
Closing the suction connection
WARNING
Danger of injury
Damage to the skin, lungs and eyes through fine dust
The suction connection must be closed using the con-
nection bushing after removing the suction hose.
1
Fit the connection bushing exactly in the suction
connection and push all the way in.
2
Turn the connection bushing all the way to the right
to close the suction connection.
Shutting down
Switching off the device
1. Switch off the device at the main switch.
2. Pull out the mains plug.
1. Switch off the device.
2. Pull out the mains plug.
3. Remove the accessory and, if necessary, flush it out
with water and allow to dry.
4. Empty the vacuum cleaner waste container, see
chapter Emptying the vacuum cleaner waste con-
tainer.
5. On completion of wet vacuum cleaning:
a Clean and dry the filter.
b Clean the waste container with a moist cloth and
dry it off.
c Close the suction connection using the connec-
tion bushing, see chapter Closing the suction
connection
6. Vacuum off the inside and outside of the device and
clean with a moist cloth.
English
Ending operation
13
Publicidad
