Kärcher IVS 100/55 M Z22 Manual Del Usuario página 15

1. Release and remove the hose clamp from the con-
nection hose.
2. Open the locks on the filter chamber cover.
3. Remove the filter chamber lid.
4. Pull the new dust bag over the filter chamber and the
inserted filter.
5. Pull the filter into the dust bag and out of the waste
container.
6. Close and dispose of the dust bag.
7. Thoroughly clean the exterior of the device before
fitting the new filter.
8. Check the sealing ring for damage.
9. Insert the new filter in reverse sequence and take
care to ensure that the filter spreader is aligned cor-
rectly in the filter bag.
Troubleshooting guide
DANGER
Unintentional start-up of the device / electric shock
Unintentional start-up of the suction motor can cause in-
juries. Voltage present on electrical parts can cause an
electric shock.
Switch off the device and unplug the mains plug before
performing any work on the device.
The motor (suction turbine) does not start running
No electrical voltage present
 Check the socket and the power supply fuse.
 Check the mains cable and the mains plug of the de-
vice.
 Check all parts for clogging.
 Check the fit of all electrical connections.
Suction power slowly reduces
Filter, nozzle, suction hose or suction pipe clogged.
 Check the accessory for clogging.
 Clean the accessory if necessary.
 Clean the filter.
 Replace the filter if necessary.
Escaping dust when vacuuming
Filter not correctly fastened or faulty.
 Clean the filter and insert it correctly.
 Check the filter for faults and replace if necessary.
Customer Service department
If the malfunction cannot be corrected, the device must
be checked by the Customer Service department.
The warranty conditions issued by our relevant sales
company apply in all countries. We shall remedy possi-
ble malfunctions on your appliance within the warranty
period free of cost, provided that a material or manufac-
turing defect is the cause. In a warranty case, please
contact your dealer (with the purchase receipt) or the
next authorised customer service site.
(See overleaf for the address)
Declaration of Conformity
EU Declaration of Conformity
We hereby declare that the machine described below
complies with the relevant basic safety and health re-
quirements in the EU Directives, both in its basic design
and construction as well as in the version placed in cir-
culation by us. This declaration is invalidated by any
changes made to the machine that are not approved by
us.
Product: Wet/dry vacuum cleaner
Typ: 9.987-xxx
Currently applicable EU Directives
2006/42/EC (+2009/127/EC)
2014/30/EU
2014/34/EU
2011/65/EU
Harmonised standards used
EN 55014-1: 2017 + A11: 2020
EN 55014-2: 2015
EN 60079-0: 2012
EN 60079-31: 2009
EN 60335-1
EN 60335-2-69
EN IEC 61000-3-2: 2019
EN 61000-3-3: 2013 + A1: 2019
EN 62233: 2008
EN IEC 63000: 2018
Designation
II 3D Ex tc IIIC T125 °C Dc
National standards used
-
The signatories act on behalf of and with the authority of
the company management.
Managing partner
M.Pfister
Kärcher Industrial Vacuuming GmbH
Robert-Bosch-Straße 4-8
73550 Waldstetten (Germany)
Ph.: +49 7171 94888-0
Fax: +49 7171 94888-528
Waldstetten, 2021/11/01
English
Warranty
15