Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Indicator light
2. Mode knob
3. Temperature setting
4. Steam button
5. Spray trigger
6. Cable protection end
7. Water tank
8. Soleplate
9. Water spraying
10. Tank cover
NOTE:
the graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
-
This appliance is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
-
Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
-
Iron
-
Instruction manual
3. OPERATION
Temperature setting
Let the iron preheat before use. If you change the temperature, wait for the iron to adapt to the
new setting before using it; especially if you select a lower temperature setting. The iron takes
longer to cool down than to heat up, so it is advisable to start ironing from a lower temperature.
34
IRONHERO 3000 SAUNA I-PUMP
Publicidad
