28. Never use the appliance of the glass jug shows signs of cracks or glass jug having a loose or weakened handle.
Only use the class jug with this appliance. Use carefully as the glass jug is very fragile.
COMPONENT PARTS
1.
Lid of reservoir
2.
Reservoir with water level indication
3.
On/off button and indicator light
4.
Reusable mesh filter
5.
Filter basket
6.
Brewing chamber
7.
Anti-drip valve
8.
Glass jug
9.
Warming plate
10. Measuring spoon
OPERATION
Before first-time use:
Before using this device for the first time please carefully rinse all detachable components with warm water.
Fill the reservoir with cold water to the maximum water level indication.
Afterwards brew water twice without coffee powder.
To percolate coffee:
1. Open the lid of the reservoir and fill the reservoir with cold water. Do not fill the water over the maximum
level.
2. Place the reusable mesh filter into the filter basket and place the filter basket into the brewing chamber.
Make sure the filter basket is fitted properly, otherwise the lid cannot be closed.
3. Use the measuring spoon to add the amount of coffee powder appropriate to the amount of cups you want
to brew.
4. Close the lid of reservoir, a click sound will be heard when the lid of reservoir is closed completely.
5. Insert the glass jug in place onto the warming plate horizontally, ensure the center hole in the glass jug lid
aligns with the anti-drip valve.
6. Connect the mains plug to an appropriate wall outlet.
7. Start brewing coffee by pressing the On/off button. The indicator light will be on.
8. If you leave the appliance switched on, the warming plate will keep the coffee warm after finishing brewing.
The whole working process will last 40 minutes. After 40 minutes the unit will be automatically shut off and
stop working. The indicator light will be off.
9. After use, turn off the appliance and disconnect the power supply.
Note:
The brewing process can be interrupted by pressing on/off switch at any time. The appliance will continue
brewing once the switch is pressed again.
The appliance is designed with an Anti-drip function. You can temporarily remove the glass jug and pour
out coffee during brewing cycle without coffee dripping from the appliance within 30 seconds.
CAUTION! When pouring coffee from the glass jug, pour it slowly. Do not incline the glass jug suddenly in a
large tilting angle, in case the hot coffee flow out from the lid rim and hurt people.
The coffee you get will less than the water you have added, as some water is absorbed by coffee powder.
DO NOT touch lid, warming plate and so on when operating as they are very hot.
Never leave the empty glass jug on the warming plate otherwise the glass jug is liable to crack.
- 55 -