Hama Passion Clear II Instrucciones De Uso página 6

5. Charging
Fully charge the earphones and the charging box once before using them for the first time .
1
Insert the earphones and connect the charging box
USB-C
2
Charging procedure for the charging box and earphones
The status LED on the charging box (2) lights up white during the charging process . After the
charging box is fully charged, the LED (2) on the charging box lights up solid white .
Once the connection to the charging cable has been cut, the LED (2) on the charging box goes out .
The status LEDs (3) of the earphones light up solid white during the charging process . Once the
earphones are fully charged, the status LEDs (3) go out .
It can take up to 1 hour (earphones) or up to 2 hours (charging box) until the batteries are fully
charged .
3
Battery capacity
Charging box
When battery levels are low, the LED (2) flashes .
Earphones
When the battery level is low (< 10%), the Battery Low announcement is made every 10 minutes
and the LED (3) flashes twice every 5 seconds .
The actual battery life varies depending on the use of the device, the settings
and the environmental temperatures (batteries have a limited service life) .
Note
If you have not used the device for a few months, it can take up to 15 - 30 minutes until the
status LED (2/3) lights up white during the charging process .
Place the earphones in the charging box . Ensure that
the earphones are inserted into the correct sides,
using the L/R markings as a guide .
Connect the USB-C charging cable included to the
charging socket (8) on the charging box .
Connect the free plug on the USB-C charging cable
to a suitable USB charger . To do this, consult the
operating instructions for the USB charger you are
using .
1
:00
h
2
:00
h
CHARGING
m
m
CHARGED
6