Philips 4400 Serie Manual Del Usuario página 11

English
10
Use the water hardness test strip supplied in the box to determine the water hardness
in your region:
1 Immerse the water hardness test strip in tap water or hold it under the tap for 1 second (Fig. 17).
2 Wait 1 minute. The number of squares on the test strip that turn red indicate the water hardness (Fig.
18).
Set the machine to the correct water hardness:
1 Tap the Settings
icon to confirm.
2 Use the up and down arrows to select the water hardness level. The number of red squares selected on
the display should be the same as the number of red squares on the test strip (Fig. 19).
3 When you have set the correct water hardness, tap the OK icon to confirm.
Adjusting grinder settings
You can change the coffee strength with the grind setting knob inside the bean container. The lower the
grind setting, the finer the coffee beans are ground and the stronger the coffee. There are 12 different grind
settings you can choose from.
The machine has been set up to get the best taste out of your coffee beans. Therefore we advise you not to
adjust the grind setting until you have brewed 100-150 cups (approx. 1 month of use).
You can only adjust the grind settings when the machine is grinding coffee beans. You need to brew 2 to
3 drinks before you can taste the full difference.
Do not turn the grind setting knob more than one notch at a time to prevent damage to the grinder.
1 Place a cup under the coffee dispensing spout.
2 Open the lid of the coffee bean hopper.
3 Tap the espresso icon and then press the start/stop
4 When the grinder starts grinding, press down the grind setting knob and turn it to the left or right. (Fig.
20)
Adjusting other machine settings
By tapping the Settings
-
Water hardness: you can select between 5 levels according to the water hardness in your region;
-
Standby time: you can select 15, 30, 60 or 180 min
-
Display brightness: you can select low, medium and high.
-
Language
-
Sound: you can activate or deactivate the beeping sound of the machine
-
Temperature: you can choose between 3 brewing temperatures for your coffee
-
Front illumination (5500 series only): you can choose 'always on', 'on during brewing' or 'always off'.
-
Measuring unit: you can choose between ml. or oz.
-
Profile activation: you can activate or deactivate profiles.
-
Rinsing on start-up: you can activate or deactivate an automatic rinsing cycle when you switch on the
machine.
-
Display backlight: you can activate or deactivate the backlight in the drink buttons.
Restoring factory settings
The machine offers you the possibility to restore the factory settings at any moment.
icon and use the up and down arrows to select 'Water hardness'. Then press the OK
icon you can adjust the following machine settings:
button.