PeakTech P 3360 Manual De Instrucciones página 54

5.2. Data Hold
The data hold function allows the meter to "freeze" a measurement
for later reference.
1. Press the "HOLD" button to freeze the display, the "HOLD"
indicator will appear in the display.
2. Press the "HOLD" button to return to normal operation.
5.3. Peak function
The PeakTech 3360 offers the "PEAK" function, which records the
peak value of an alternating voltage. The meter can have negative
or positive peaks lasting a millisecond
Capture (1 ms).
1. Press the PEAK button and "PEAK" and "MAX" appear in the
display. The meter updates this display each time a higher
positive peak value occurs.
2. Press the PEAK button again and "MIN" appears in the display.
The meter updates this display each time a lower positive peak
value occurs.
3. Press and hold the PEAK button for longer than 1 second to
exit "Peak" mode.
The "automatic switch-off" function is automatically deactivated in
this mode.
54