Descargar Imprimir esta página

Hikmicro AD Serie Guia De Inicio Rapido página 42

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 48
Directive 2006/66/EC and its
amendment 2013/56/EU (Battery
Directive): This product contains a
battery that cannot be disposed of as unsorted
municipal waste in the European Union. See the
product documentation for specific battery
information. The battery is marked with this
symbol, which may include lettering to indicate
cadmium (Cd), lead (Pb), or mercury (Hg). For
proper recycling, return the battery to your supplier
or to a designated collection point. For more
information see: www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-003 (B)/NMB-003
(B) standards requirements.
Safety Instruction
These instructions are intended to ensure that
user can use the product correctly to avoid danger
or property loss. Please read all the safety
information carefully before using.
Laws and Regulations
Use of the product must be in strict compliance
with the local electrical safety regulations.
Transportation
● Keep the device in original or similar packaging
while transporting it.
● Keep all wrappers after unpacking them for
future use. In case of any failure occurred, you
need to return the device to the factory with the
original wrapper.
● Transportation without the original wrapper
may result in damage on the device and the
company shall not take any responsibilities.
● Do not drop the product or subject it to physical
shock. Keep the device away from magnetic
interference.
Power Supply
● Input voltage for the device should meet the
Limited Power Source (12 VDC, 1.5 A) according
to the IEC62368 standard. Please refer to
technical specifications for detailed information.
● Make sure the plug is properly connected to the
power socket.
● DO NOT connect multiple devices to one power
adapter, to avoid over-heating or fire hazards
caused by overload.
Battery
● Improper use or replacement of the battery
may result in explosion hazard. Replace with the
same or equivalent type only. Dispose of used
batteries in conformance with the instructions
provided by the battery manufacturer.
● For long-term storage of the battery, make sure
it is fully charged every half year to ensure the
battery quality. Otherwise, damage may occur.
● When the device is powered off and the RTC
battery is full, the time settings can be kept for 6
months.
● In the first use, charge the device for more than
4 hours in the power-off status.
● The lithium battery voltage is 3.6 V, and the
battery capacity is 10050 mAh.
Maintenance
● If the product does not work properly, please
contact your dealer or the nearest service center.
We shall not assume any responsibility for
problems caused by unauthorized repair or
maintenance.
● A few device components (e.g., electrolytic
capacitor) require regular replacement. The
average lifespan varies, so periodic checking is
recommended. Contact your dealer for details.
● Wipe the device gently with a clean cloth and a
small quantity of ethanol, if necessary.
● If the equipment is used in a manner not
specified by the manufacturer, the protection
provided by the device may be impaired.
● Please notice that the current limit of USB 3.0
PowerShare port may vary with the PC brand,
which is likely to result in incompatibility issue.
Therefore, it's advised to use regular USB 3.0 or
USB 2.0 port if the USB device fails to be
recognized by PC via USB 3.0 PowerShare port.
Using Environment
● Make sure the running environment meets the
requirement of the device. The operating
temperature shall be -10 °C to 50 °C (14 °F to
122 °F), and the operating humidity shall be 95%
or less.
● Place the device in a dry and well-ventilated
environment.
● DO NOT expose the device to high
electromagnetic radiation or dusty environments.
● DO NOT expose the device in wet conditions.
● The pollution degree is 2.
Technical Support
https://www.hikmicrotech.com/en/contact-
The
us.html
portal will help you as a HIKMICRO
customer to get the most out of your HIKMICRO
products. The portal gives you access to our
support team, software and documentation,
service contacts, etc
Emergency
● If smoke, odor, or noise arises from the device,
immediately turn off the power, unplug the power
cable, and contact the service center.
Manufacture Address
Room 313, Unit B, Building 2, 399 Danfeng Road,
Xixing Subdistrict,Binjiang District, Hangzhou,
Zhejiang 310052, China
Hangzhou Microimage Software Co., Ltd.
40

Publicidad

loading

Productos relacionados para Hikmicro AD Serie

Este manual también es adecuado para:

Ad21