Hikmicro AD Serie Guia De Inicio Rapido página 7

1. Appearance
Component & Interface (Page 1 – A)
No. Component
1 Touch Screen
2 Volume Wheel
3 Reboot Key
4 Headset Jack
5 Sensor Interface
6 Type-C Interface
7 Indicator
8 Power Key
Neck Strap
9
Attachment Point
Leakage Detection
10
Level Switch
Sound Collection
11
Button
2. Assemble Accessories
Mount the Neck Strap (Page 2 – B)
Steps
1. Thread one end of the neck strap through an attachment point of the device and fasten
it.
2. Repeat step 1 to finish mounting the neck strap.
3. Adjust the tightness accordingly.
Mount the Handheld Sensor (Page 3 – C)
Steps
1. Insert the aviation connector of the handheld sensor into the sensor interface of the
device.
2. Turn the aviation connector clockwise to tighten it.
3. Turn the short listening stick clockwise to tighten it.
Function
 Show the live view interface.
 Touch-screen operation.
Adjust the headset volume.
Press to restart the device.
Connect the headset to the device.
Connect the handheld sensor or pick-up sensor to the
device.
Charge the device or export files with Type-C cable.
Indicate the charging status of the device.
 Solid red: charging normally
 Solid green: fully charged
 Press: standby mode/wake up device
 Hold: power on/off
Mount the neck strap.
Switch the frequency range according to the detection
environment.
Hold to start receiving the audio signal from the
handheld sensor or the pick-up sensor and release to
stop receiving the audio signal.
5
English