Vox TRD6F49IX Manual De Instrucciones página 6

INSTALLATION
WALL DRILLING AND BRACKET FIXING
3mm
●
Please read the instructions carefully.
●
Unpack the canopy and check that all functions are working. Ensure that the voltage (V) and
the frequency (Hz) indicated on the serial plate match the voltage and frequency at the
installation site.
●
Check that the area behind the installation surface to be drilled is clear of any electrical
cables or pipes, etc.
●
The stainless steel and glass surfaces of the canopy are very easily damaged during
installation if grazed or knocked by tools. Please take care to protect the surfaces during
installation.
●
Protect the cooktop surface below with cardboard, or the like, to prevent damage occurring
whilst the wall canopy is being installed above.
●
The manufacturer shall not be liable for failure to observe all safety
the correct and normal operation of electrical parts.
6mm
Choose a venting mode:
3mm
Extraction-air mode
6mm
Venting knob position
3mm
Recirculation mode
Extraction-air mode: Turn
the venting knob here
means venting outside
Circulating-air mode:
Turn the venting knob
here means recirculation
5
regulations in force for