Casselin CPBRE3VN Manual página 12

3. TRANSPORT, PACKAGING AND STORAGE
3.1 Inspection after transport
Verification of the absence of damage and the integrity of the device must be carried out upon receipt of the
package. In the event of identification of damage due to transport, refuse or accept the product delivered only
under reserve *. A complaint detailing the defects observed must then be made. The perception of damages
is only possible in the event of a complaint formulated within the time limits provided, ie 24-48 hours at the
most.
* written on the right paper or digital delivery from the carrier.
3.2 Packaging
The packaging of the device must be kept in the event of a move, or for a return to the after-sales service.
The interior and exterior packaging must be completely removed before using the device. The standards in
force in your country concerning the protection of the environment must be observed before destroying the
packaging.
3.3. Storage
WARNING
The storage of the device in stock can be done but only in its original closed packaging.
Storage can be carried out under these conditions:
• Storage in a dry, non-humid place
• Sheltered from the sun
• Control of stock for more than 2 months (general condition of the device and all the elements that make it
up)
• No material shaking
• Storage in a closed room and not outside.
4. MATERIAL CHARACTERISTICS
* Subject to change
Model
Eutectic Plate
Dimensions W 456 x D 428 x H 220 mm
Weight
5. INSTALLATION AND USE
COMMISSIONING
The device must be completely removed from its packaging. All guards must be completely removed.
Place the device on a solid, flat surface Never place the device on a flammable surface.
Do not install this device near open fires or other heating devices.
Freeze the eutectic plate in a freezer (-4°C or less) for approximately 3 to 6 hours before each use. (The
plate stays cold for about 4 to 6 hours at an ambient temperature of about 25°C).
CPBRE3VN
3 x Ø 170 x 18mm
6kg
CPBRE3TN
3 x Ø 170 x 18mm
W 225 x D 592 x H 422 mm W 352 x D 352 x H 220 mm
7kg
CPBRE1GN
1 x Ø 290 x 18mm
5kg
EN