Publicidad
Idiomas disponibles
Idiomas disponibles
Instructions Guide
EN
Basic Operation
Please note that the instructions within this manual will refer to the radio button
number e.g (Ref.*number*) in accordance to the diagrams on pages 3-5.
Starting up your radio
Plug the power connector into the system via the "DC IN" port (Ref.15) to charge the
radio. Please ensure that the radio is not exposed to water when it is being charged via
mains power. Charge the radio for approximately 5-6 hours to fully charge the internal
battery for approx 15 hours of portable charge. Remove from mains power when using
the radio portably and in the shower. For more information on charging, please see
additional guidance on page 22.
Ensure the handle (Ref.9) is extended above the unit as this will enable you to get the
best signal possible before scanning. Once charged, remove the power cable from the
unit and switch the radio on by pressing the Power button (Ref.2).
When switched on for the rst time, the radio will display a "Welcome to Digital Radio"
screen, followed by going to DAB/DAB+ mode to perform an automatic scan for
available stations. The screen will show "Scanning... " as it searches for available stations
and will play the rst available station once the scan is complete. To change the
language of the device, refer to page 21 of the manual to switch between English and
German.
To place the radio into standby mode, press the Power button (Ref.2).
Please note that the radio will reset to default volume when switched o /on.
8
Publicidad
