HAEGER Venus 600 Instrucciones De Uso página 6

Assembling the floor brush
1. Fit the telescopic extension tube onto the air inlet.
2. Push the floor brush on to the end of the telescopic extension tube.
3. Adjust the telescopic extension tube to the required length by pressing the telescopic
extension tube button down and sliding out the tube.
4. Select which position on the floor brush is required for the floor type by pressing the
switch forwards or backwards. We recommend cleaning hard floors, wood and
parquet with the fibre brush extended, and cleaning carpets and rugs with the fibre
brush retracted.
5. Turn on the vacuum cleaner by pressing the "ON/OFF" button to use.
How to use
1. Make sure that the filter is correctly installed.
2. Make sure the ON/OFF switch is in OFF position (turned off).
3. Chose if you want to use the appliance with or without the extension attachment.
4. Insert the power plug into the power outlet.
5. Push the ON/OFF switch.
6. Guide the nozzle over the surface to be cleaned, check whether the maximum fill
level on the collecting container has been reached. If this is the case, it needs to be
emptied.
7. After use, push the ON/OFF switch down again and unplug the appliance.
English - 4