Publicidad
Idiomas disponibles
Idiomas disponibles
PREPARE THE INSTALLATION
Ensure the power has been turned off before beginning this installation.
Plug must be assembled in places easy to drag and insert.
To install this hood you will require two assistants. Tools you will need:
•
Drill
•
Phillips Screwdriver
•
Tape Measure
NOTES:
•
Installation work and electrical wiring must be done by qualified person(s) in accordance
with all applicable codes and standards, including fire rated construction.
•
Do not discharge the exhaust air into a fuel from other appliances burning gas or other fuels.
•
Regulations concerning the discharge of air have to be fulfilled.
•
The cooker hood must be placed at a minimum distance
of 65cm above the cooking surface of a hob.
•
The cooker hood must be placed at a maximum distance
of 75cm above the cooking surface of a hob.
CUPBOARD MOUNTING INSTALLATION
•
Drill a 130mm diameter and four 3.5mm diameter hole as below picture. ATTENTION: If your
cooker hood works at circulating-air mode, it is not necessary to drill 130mm diameter hole.
•
Use the 4 screws to fix the cooker hood to a kitchen cupboard .Check that
your fixings are correctly located, by temporarily fitting the cooker hood.
If correct, fit the unit into position. Tighten the screws if necessary.
9
Publicidad
