Publicidad
Idiomas disponibles
Idiomas disponibles
All Models
Hatco Palletti
Induction Warmers are equipped with a
®
single induction coil underneath a ceramic glass surface.
Each model features a control panel with a On/Off Button,
Temperature Control Arrow Buttons, and Temperature Setting
Indicators. All Induction Warmers include either an attached
1800 mm (71") power cord with plug or a detachable 1800 mm
(71") power cord with plug.
NOTE: Refer to "Pan Specifications" in the OPERATION section
of this manual for details on "induction-ready" pans,
pans not suitable for induction warming, and pan sizes.
Hatco Induction units have several safeguards built into each
unit that ensure protection to the unit as well as the operators.
• A fan-driven ventilation system ensures that the electronic
circuits in the unit do no overheat. Temperature probes
monitor the electronic circuits and will signal the unit to
shut down if the circuits get too hot.
• A temperature probe in the warming zone monitors the
zone temperature. This probe detects overheating in the
warming zone due to an empty pan.
• Electronic circuitry in the warming zone detects when a
small, ferrous object (such as a fork, spoon, or ring) is
placed on the unit, and the unit will not operate.
Countertop Models
Countertop Induction Warmers are portable, daisy chain units
with a detachable power cord with plug. Using the included
432 mm (17") jumper power cord, up to five of these models
can be connected together off of one electrical receptacle (see
OPTIONS AND ACCESSORIES for additional jumper power
cords).
NOTE: For European units, a total of five units can be
connected together off of one electrical receptacle. For
Chinese and Australian units, a total of four units can be
connected together off of one electrical receptacle.
CD = Countertop Daisy Chain
Form No. IWRMCEM-0321
I W R M - x 1 - x x x x - x x
Induction
Warmer
B = Built-In
Single Coil
MODEL DESCRIPTION
Detachable
Power Cord
Ceramic
Glass
Surface
On/Off
Button
Temperature Control Arrow Buttons
Model IWRM-CD1-05
Built-In Models
Built-In Induction Warmers are designed to be installed into a
variety of solid material countertops. The unit includes a remote
control panel that connects to the Induction Warmer with a
detachable 1000 mm (39") control cable.
Model IWRM-B1-1313-05
MODEL DESIGNATION
5
Jumper
Power Cord
Temperature Setting Indicators
Remote
Control
Panel
Unit Wattage
05 = 500 W
Glass Surface Depth
Glass Surface Width
Control
Cable
Publicidad
