Care And Maintenance - Fiem EASY Manual De Uso

CARE AND MAINTENANCE

In order to achieve the best operation and longest life of the machine, follow the following precautions:
• do not expose the machine to outdoor elements
• do not place machine in hot, wet or cold rooms;
• avoid bad handling during moving that can cause breakages inside the machine and affect its working;
• disconnect the power plug before cleaning the machine;
• do not accidentally pull out the power cable when moving the machine.
IMPORTANT: take out the plug from the socket by holding the plug and not the power cable; use only a mains
power socket or surge-protected extension lead.
• for cleaning and disinfection please follow the advice as follows:
HOW TO CLEAN THE INCUBATOR:
For a good hygiene during the incubation, it is recommended to clean the machine before and after its use;use
a wet cloth on the machine with a light disinfectant, do not use solvents that can damage the machine cabinet;
clean the base of the machine and the water basins with a normal domestic detergent.
ADVICE: after cleaning the machine, please keep it working without eggs and basins for at least two hours
(with the door semi-closed), in order to dry the humidity which has accumulated during the incubation period...
This will ensure the correct machine operation for the next use.
WARRANTY
Each part of the machine has been fully tested by the manufacturer before delivery or shipping.
The manufacturer's guarantee does not include damage caused by improper transport and does not include
damage to the electrical and electronic systems caused by incorrect connection to the power supply.
The guarantee includes repairs or replacement of all the parts that are found to be defective in the 24 months
(12 months by the manufacturer + 12 months by the seller) following the delivery of the machine to the custo-
mer and applies when the customer informs the manufacturer, no later than the eighth day from when the fault
occurred.
This Guarantee refers to possible defects in workmanship and it is excluded in any case of improper use,
improper placement and connection or in any case of tampering from unauthorized personnel.
The guarantee includes all technical telephone support, but the customer is liable for all shipping costs for sen-
ding all defective parts to be replaced to FIEM and all technical call-out costs.
The guarantee does not include any compensation for any downtime of the machine or damages incur-
red during use.
Only staff authorised by the manufacture must be allowed to carry out repairs under the guarantee; if
this clause is not adhered to, the guarantee will cease to apply.
STANDARDS OF REFERENCE
This product conforms to the essential Electromagnetic and safety requirements foreseen by the following
directives:
• 2004/108/CE of 15 December 2004
• 2006/95/CE of 12 December 2006
as designed in accordance with the requirements of the following Harmonized Standards
• EN 55014-1: 2006
• EN 55014-2: 1997+A1:2001
• EN 61000-3-2: 2006
• EN 61000-3-3: 1995+A1:2001+A2: 2005
• EN 60335-2-71:2003+A1:2007
Conformity to the above requirements is attested by
The mark was introduced in 1995.
14
marking on the product;