Metabo HPT WR 18DH Manual De Instrucciones página 16

English
Tightening torque can be adjusted according to the type of
work by combined use of the High / Low mode selector
switch and the auto stop mode selector switch. (Fig. 17)
Auto stop mode
selector switch
(1) High / Low mode selector switch (Fig. 18)
The tightening mode switches between 4 different
rotation speeds each time the High / Low mode
selector switch is pressed.
1 2
Table 6: High / Low mode selector function setting
Maximum
Indicator lamps unloaded
speed (/min)
1
2
3
4
16
High / Low mode
selector switch
Fig. 17
3 4
Fig. 18
Uses
For work that
1,200 requires fine
adjustments.
1,800
For work that
requires the power to
be suppressed.
2,400
For work that
2,800 requires a priority on
power and speed.
(2) Auto stop mode selector switch
Pressing the Auto stop mode selector switch toggles
the mode.
Forward: Auto stop mode
Reverse: Auto slow mode
Auto stop mode
selector switch
○ Auto stop mode
Stops automatically after a preset time has elapsed.
Push the pushing button to the forward ("R") position,
then press the Auto stop mode selector switch to
select the setting. (see Table 7)
Pushing button
1
Forward
2
Auto stop mode
selector switch
Fig. 19
Fig. 20