Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION: Always do
maintenance before you
start the product after a
long time in storage.
• Put the power switch in the
off (0) position and disconnect
the power plug from the
power source before you do
maintenance on the product.
• Disconnect the product from
the water source and make
sure that all parts are dry
before you do maintenance
on the product.
• Do the maintenance work
written in this operator's
manual only.
Introduction
WARNING:
safety chapter before you assemble the
product.
To install the garden hose adapter
1. Remove the transport cover from the water inlet and
discard it. (Fig. 15)
2. Install the garden hose adapter on the water inlet.
(Fig. 16)
CAUTION:
install the garden hose adapter straight
on the water inlet. If the garden hose
Introduction
WARNING:
safety chapter before you use the product.
20
Assembly
Read and understand the
Make sure that you
Operation
Read and understand the
• Use only spare parts
recommended by Husqvarna.
High pressure water hoses,
fittings and couplings are
important for the safety when
you operate the product.
Use only hoses, fittings
and couplings that are
recommended by Husqvarna.
• Do not repair the product.
Speak to your Husqvarna
service agent.
• Speak to your Husqvarna
service agent if the power
plug or power cord is
damaged.
• Do not let children clean or do
maintenance on the product.
adapter is not installed straight, it can
cause damage to the threads and
leakage can occur.
3. Tighten the garden hose adapter fully.
4. Remove the garden hose adapter in the opposite
sequence.
To install the holder for the spray
handle and the spray lance
1. Put the holder for the spray handle and spray lance
in position. (Fig. 17)
2. Install the 2 screws.
3. Put the cleaning tool in its holder.
Husqvarna Connect
Husqvarna Connect is a free app for your mobile device.
The Husqvarna Connect app gives extended functions
for your Husqvarna product:
•
Extended product information.
2167 - 004 - 18.12.2023
Publicidad
