Bosch GDR Professional 18V-220 C Manual Original página 16

16 | English
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The machine is intended for driving in and loosening screws
and bolts as well as for tightening and loosening nuts within
the respective range of dimension.
®
With the Bluetooth Low Energy Module GCY 42 inserted,
power tool data and settings can be transferred between the
power tool and a mobile device by means of Bluetooth
less technology.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Tool holder
(2) Locking sleeve
(3) Rotational direction switch
(4) Bluetooth® Low Energy Module cover GCY 42
(5) Belt clip
a)
(6) Rechargeable battery
(7) Rechargeable battery release button
User interface
(8)
(9) On/off switch
(10) Worklight
(11) Handle (insulated gripping surface)
(12) Screwdriver bit with ball catch
a)
(13) Screwdriver bit
a)
(14) Universal bit holder
User interface
(15) Status indicator for power tool
(16) Mode indicator
(17) Mode button
(18) Worklight
(19) Speed button
(20) Speed preselection indicator
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless impact screw-
driver
Article number
1 609 92A 8HZ | (14.12.2023)
Cordless impact screw-
driver
Rated voltage
No-load speed
– Setting 1
– Setting 2
– Setting 3
Impact rate
– Setting 1
– Setting 2
– Setting 3
Max. tightening torque
Machine screw diameter
Tool holder
®
wire-
Weight according to
EPTA-Procedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
ure during operation and dur-
ing storage
Recommended rechargeable
batteries
Recommended chargers
a)
Data transfer
Bluetooth®
Signal interval
a)
Max. signal range
A) Measured at 20–25 °C with rechargeable battery ProCORE18V
B) Depends on battery in use
C) The mobile terminal devices must be compatible with
D) The signal range may vary greatly depending on external condi-
Values can vary depending upon the product and are subject to ap-
plication and environmental conditions. For further information
www.bosch-professional.com/wac.
Noise/vibration information
Noise emission values determined according to EN
62841-2-2.
Typically, the A-weighted noise level of the power tool is:
GDR 18V-220 C
Sound pressure level 97 dB(A); sound power level
105 dB(A). Uncertainty K = 3 dB.
3 601 JL6 0.. Wear hearing protection!
A)
min
min
min
A)
min
min
min
A)
Nm
mm
B)
C)
D)
4.0Ah.
Bluetooth® Low Energy devices (version 4.1) and support the
Generic Access Profile (GAP).
tions, including the receiving device used. The Bluetooth® range
may be significantly weaker inside closed rooms and through
metallic barriers (e.g. walls, shelving units, cases, etc.).
GDR 18V-220 C
V= 18
–1
0–800
–1
0–2300
–1
0–3400
–1
0–1500
–1
0–3400
–1
0–4000
220
M6–M16
¼" internal
hexagon
kg 1.3–2.4
°C 0 to +35
°C –20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
Bluetooth® 4.1
(Low Energy)
s 8
m 30
Bosch Power Tools