Publicidad
Idiomas disponibles
Idiomas disponibles
TABLE OF CONTENTS
Table of contents ................................................................ 1
Introduction ......................................................................... 1
Porduct specifications ......................................................... 1
Safety .................................................................................. 1
General safety instructions ................................................. 1
Specific safety instructions the machine ............................. 2
Electrical requirements ....................................................... 2
Accessories and attachments ............................................. 3
Carton contents .................................................................. 3
INTRODUCTION
This tool has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability have
been given top priority in the design of this product making it easy to maintain and operate.
PRODUCT SPECIFICATIONS
MODEL:
KN SCM-07A
Motor:
3/4 HP, 120 V, 60 Hz
Motor speed: 1720 RPM
Amps:
4.6 A
Drive:
Band
Transmission: Sealed worm gear
SAFETY
WARNING
: To avoid electrical hazards, fire hazards, or damage to the tool, use proper circuit protection. Use a
separate electrical circuit for your tools. To avoid shock or fire, replace power cord immediately if it is worn, cut or
damaged in any way.
GENERAL SAFETY INSTRUCTIONS
WARNING
:
Read carefully these Operating
Instructions. Familiarise with the controls and proper
use of the machine. Keep the Operating Instructions for
future reference. The warning labels with instructions
attached to the machine provide important information on
safe operation.
1. READ and become familiar with the entire Operator's
Manual. LEARN the tool's application, limitations and
possible hazards.
2. REMOVE ADJUSTING KEYS AND WRENCHES. Form a
habit of checking to see that keys and adjusting wrenches
are removed from the tool before turning ON.
3. KEEP WORK AREA CLEAN. Cluttered areas and
benches invite accidents.
4. DON'T USE IN DANGEROUS ENVIRONMENT. Don't
use power tools in damp or wet locations, or expose
them to rain. Keep work area well lighted.
5. KEEP CHILDREN AWAY. All visitors should be kept at
a safe distance from work area.
6. MAKE WORKSHOP CHILDPROOF with padlocks.
7. DON'T FORCE THE TOOL. It will do the job better and
safer at the rate for which it was designed.
8. USE THE RIGHT TOOL. Do not force tool or attachment
to do a job for which it was not designed.
Round cutting capacity:
4-1/2"
Rectangular cut capacity: 4-1/2" x 6"
Blade speeds:
80, 120, 200 FPM
Blade size:
64-1/2" x 1/2"
Overal height:
Horizontal 38"
Vertical 54"
1
Table of loose parts ............................................................. 3
Assembly ............................................................................ 4
Adjustments ....................................................................... 5
Operation ........................................................................... 7
Maintenance ...................................................................... 8
Troubleshoothing ............................................................... 8
Part list .............................................................................. 9
Assembly diagram .............................................................. 12
Notes ................................................................................. 26
Height floor to table:
Overall width:
Overall length:
Overall bed:
Cutting angle adjutment:
Net and gross weight:
9. USE PROPER EXTENSION CORD. Make sure your
extension cord is in good condition. When using an
extension cord, be sure to use one heavy enough to carry
the current your product will draw. An undersized cord
will result in a drop in line voltage and in loss of power
that will cause the tool to overheat.
10. WEAR PROPER APPAREL. Do not wear loose clothing,
gloves, neckties, rings, bracelets, or other jewelry that
may get caught in moving parts. Non-slip footwear is
recommended. Wear protective hair covering to
contain long hair.
11. ALWAYS WEAR EYE PROTECTION. Wear goggles
for protection against projected chips.
12. DISCONNECT TOOLS before servicing; when
changing blade and other part.
13. USE RECOMMENDED ACCESSORIES. Consult the
Operator's Manual for recommended accessories.
The use of improper accessories may cause serious injury.
14. NEVER STAND ON TOOL. Serious injury could occur
if the tool is tipped or if the cutting tool is
unintentionally contacted.
15. CHECK FOR DAMAGED PARTS. Before further use of
the tool, a guard or other part that is damaged should
be carefully checked to determine that it will operate
properly and perform its intended function – check for
alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other conditions
that may affect its operation. A guard or other part that
is damaged should be properly repaired or replaced.
33"
15.5"
37.4"
26.3" x 6.9" x 2/9"
45º x 90º
50 / 53 kg
Publicidad
