Descargar Imprimir esta página

Valeo GO 7 Manual Del Usuario página 4

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 27
You are also endangering your safety and the safety of other road
users, taking the risk of personal liability costs and possibly even
criminal charges in the event of accidents that can be attributed to
manipulation of the e-bike.
Do not open your motor. All repairs must be done by
professionals with specific tools and original Valeo spare
parts. Opening the motor will void any warranty claim.
Modification to components of the e-bike like chainrings for instance
must be approved by the e-bike manufacturer. This will prevent the
motor from overloading and damaging any component.
Remove the battery from the e-bike before beginning any
maintenance, repair, inspection work on the e-bike or transporting it
with a car or airplane, or even storing it. Unintentional activation of the
e-bike system poses a risk of injury.
When using the walk assist mode make sure there is enough space
between yourself and the e-bike as the pedals may turn at the same
time.
Under some conditions the external components of the motor may
reach a very high temperature. Avoid any contact between yourself
and the motor during or immediately after using the e-bike.
Observe all national regulations which set out the approved use of
e-bikes.
When an authorized Valeo dealer connects the e-bike to the Valeo
Diagnostic tool, data about the e-bike system such as voltage,
temperature, etc is transferred to Valeo for the purpose of product
improvement. You can find more information about this on our
website at www.valeocyclee.com
4
PRODUCT SPECIFICATIONS
Product features
The GO 7 unit is composed of different elements shown in illustration
below.
Electric Motor Area
Gearbox Area
Speed sensor
The speed sensor of your e-bike is a key element of its function.
The speed sensor is a part designed and distributed by the bike
manufacturer and is not a Valeo Cyclee™ spare part.
The function of the speed sensor is to communicate the bike speed to
the drive unit. The speed sensor is generally placed on the rear end of
the e-bike and is composed of a sensor placed on the bike frame and
a magnet placed on the rear wheel.
If the e-bike motor is not providing assistance, always check that the
speed sensor and the magnet are in place and not contaminated by
dirt or dust. Also ensure the speed sensor cable is not damaged and/
or cut.
Connectors Area
Gear Shifter Area
Power
Electronics Area
Motor Reducer Area
5

Publicidad

loading

Productos relacionados para Valeo GO 7