25
A layer of frost occurs in
the compartment
Temperature inside is
too warm
Temperature inside is
too cold
Doors can't be closed
easily
Water drips on the floor
The light is not working
Hear water bubbling in
the refrigerator
Check that the air outlets are not blocked by food and ensure
food is placed within the appliance to allow sufficient
ventilation. Ensure that door is fully closed. To remove the
frost, please refer to the " C leaning and care " chapter.
You may have left the doors open too long or too frequently; or
the doors are kept open by some obstacle; or the appliance is
located with insufficient clearance at the sides, back and top
Increase the temperature by following the "Display controls"
chapter.
Check whether the top of the refrigerator is tilted back by
10-15mm to allow the doors to self close, or if something inside
is preventing the doors from closing.
The water pan (located at the rear bottom of the cabinet) may
not be properly leveled, or the draining spout (located
underneath the top of the compressor depot) may not be
properly positioned to direct water into this pan, or the water
spout is blocked. You may need to pull the refrigerator away
from the wall to check the pan and spout.
The LED light may be damaged. Refer to replace LED lights
in cleaning and care chapter.
The control systems has disabled the lights due to the door
being kept open too long, close and reopen the door to
reactivate the lights.
This is normal. The bubbling comes from the refrigerant
coolant liquid circulating through the refrigerator.