Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
(continued)
Blowing
Feature
Your Vac features a blowing port. It can
blow sawdust and other debris. Follow the
steps below to use your Vac as a blower.
opposite end of hose, then place the
car nozzle on the wand.
4. Turn Vac on and you are ready to use
your Vac as a blower.
_, WARNING: Always wear safety
eyewear complying with ANSI Z87.1
(or in Canada, CSA Z94.3) before
using as a blower.
,A. WARNING: To reduce the risk of
injury to bystanders, keep them clear
of blowing debris.
_, CAUTION: Wear a dust mask if
blowing creates dust which might be
inhaled.
,A. CAUTION: To reduce the risk of
hearing damage, wear ear protectors
when using the Vac/Blower for
extended time or in a noisy area.
1. Locate blowing port of your Vac.
2. Insert the locking end of the Pos-I-
Lock® premium hose into the blowing
port of the Vac. The hose should snap
into place. To remove the hose from the
Vac, press the release button in the
hose assembly and pull the hose out of
the Vac inlet.
3. (Optional) Attach extension wand to
//
B OW
........ i¸ i J
Extension
_
-_--j/=
t.
Car Nozzle (Optional)
12
Publicidad
