ICU CLOM Cam5 Guia De Inicio Rapido página 17

ENGLISH 17
AA batteries
The camera can be powered with alkaline
or lithium batteries. For best results, we
recommend powering the camera with
lithium batteries. These typically provide
a high voltage, even at low temperatures.
AA rechargeable batteries
AA rechargeable batteries deliver less
voltage at very low temperatures and are generally not recommended for
cameras with 8 AA batteries.
18650 — lithium-ion rechargeable batteries
When using 18650 batteries, configure
the type of batteries used in the camera
menu under "Settings". Failure to do so
can significantly reduce the
performance of the batteries.
External power supply
Only use our ICUServer products (e.g.
5000mAh External Super Li-Ion
rechargeable battery, icusun solar panels, etc.) as an external power source
(shop.icu-clom.com). Other power sources may void the warranty.
Important notes
▪ If you do not plan to use the camera for a prolonged period, remove the battery
to prevent it from leaking.
▪ As an alternative to batteries, you can also power the camera with an external
12V/2A DC power supply. Ensure that the power supply has the correct voltage
rating. We recommend removing the batteries when using a power supply.
▪ Before using a new/different SD card, it must be formatted in the camera (see
camera menu).
▪ To prevent data loss, switch the camera to "OFF" before changing the
batteries or the SD card, or before inserting or unplugging an external power
supply.
▪ Do not apply pressure to the PIR motion sensor.