Beeper FX2000-10 Manual De Instrucciones página 20

ASSEMBLY
1
1. To begin assembling your scooter, straighten the mast
and lock it using the folding system.
3
3. Unscrew the 4 screws of the stem clamp using the n°5
Allen key and remove the front part.
5
5. Position the display tab on the front of the bracket.
Match the two upper screw holes in the bracket to the two
holes in the display bracket.
2
2. The assemblies required are those of the
handlebar and the display
4
4. Install the handlebar between the two parts of
the caliper.
6
6. Tighten the 4 screws firmly using the Allen key to
secure the display and the handlebar.
21