Publicidad
Idiomas disponibles
Idiomas disponibles
3. TRANSPORT
3.1 Transport & handling
This appliance needs to be lifted by two or more people. Remember to always lift from the legs and
not the back. Never try to lift or move objects beyond your capabilities. Ask for assistance or use the
appropriate equipment, if necessary.
3.2 Packaging
Unpack and inspect your purchase immediately after receipt. If there are any latent defects or damage
to the item, please contact your supplier immediately. Save all packaging materials in case the machine
needs to be returned or inspected by the courier.
3.3 Before use
Remove any protective film from any surfaces and clean the appliance and accessories thoroughly before
use (see section 6 on "Maintenance").
4. INITIAL SET-UP
4.1 Wiring & connections
If your machine is supplied with a factory fitted molded plug then you may plug the unit into a standard
electrical outlet. Make sure that the voltage of the machine and the wall outlet are compatible.
If your machine is not supplied with a factory fitted molded plug then a certified electrician must be
contracted to wire the unit to the power supply.
Please find the circuit diagram in Appendix 3.
4.2 Placement
The appliance must be positioned on a stable, flat surface. Choose a surface where there is no direct
sunlight and is not close to a direct heat source, such as a cooker, oven or radiator.
When positioning the appliance, keep a distance of 10cm (4") between the appliance and walls, or other
objects for ventilation and ease of use.
Position the appliance so that the plug is accessible at all times. Always plug the power cord into a
compatible, grounded socket.
Publicidad
