5.1 How to use the appliance
•
Insert the corn granulate into the basin by opening the lid and pouring it into the loading hole.
The appliance is supplied with 5 to 8kg of corn granulate, depending on the size of the appliance.
•
Before using the appliance, press the "Start/Stop" button and let the appliance run for about 20
minutes until it is warmed up.
Results may not be as good if the appliance is not warmed up before use.
Only insert clean, damp cutlery.
•
Once the appliance has been warmed up, gently place the cutlery into the appliance through the
opening on the top of the machine.
•
The cutlery will now make its way through the inner maze by means of vibrations.
•
When ready, the dry and polished cutlery will drop out of the front opening of the appliance (see
illustration in Appendix 1).
The appliance is equipped with a UV lamp and a fan. These provide disinfection and blow off any
corn pellet dust the cutlery may have accumulated.
5.2 Cleaning
•
Regularly check and clean the appliance, its parts and accessories.
•
Always switch off and disconnect the power supply before performing any cleaning or maintenance.
•
Never use aggressive or abrasive cleaning agents. Do not use solvents or petroleum-based cleaning
agents. Some cleaning agents may leave a harmful residue or cause damage to the machine. Use a
mild food-safe cleaning product instead.
•
Do not use a scourer or any sharp objects during cleaning as this may cause damage to the machine.
•
Never hose down the machine or immerse it in water or any other liquid. Instead, wipe down the
exterior with a damp cloth. Do not use a steamer to clean the machine.
•
Never let the power cable or power plug get wet.
5. OPERATION
EN
9