Create WARM SLIM 1500 Manual De Instrucciones página 10

Insert the plug in a suitable power socket. The touch screen buttons located on the product
correspond to the remote control functions.
The display will be off automatically after few minutes.
Wifi connection
Temperature and
time control
P OW E R
When the product is on, press "power". The upper part of the display shows temperature. The
heater is working at low power heating conditions.
MO DE
Low grade, high grade.
TE MPE R ATU R E
The temperature can be set from 5 °C to 40 °C.
Internal temperature is displayed every time the appliance is started up. The temperature
can be set when the appliance is on stand-by or heating. When the room temperature reach-
es the set level, the high temperature power stops and the low temperature power remains
active. When room temperature is two degrees over the set temperature, both the high and
lower temperature powers will stop operating. The machine will begin operating again only
when temperature decreases two degrees with respect to the set temperature.
T IME R
The timer button can be set to start or stop the appliance at the desired time, with a time in-
terval between 1 and 24 hours.
CH I LD LOCK
Press the child clock button for three seconds to lock the heater. After pressing the Child
Lock button for three seconds again, the heater is unlocked.
Yo can also press the mode button on the control panel for 3 seconds to lock the screen or
unlock it.
E NGL I SH
10
CONTROL PANEL
Display
Power
Mode
Timer
Child lock