Create Cyclone Force Manual De Instrucciones página 10

EMPTY THE TANK AND THE DUST FILTER
Press the button that you will find under the container to open the lid and empty the dust
from the vacuum cleaner.
CLEAN THE DUST CONTAINER AND FILTER
1. Press the button on the top of the dust container and turn it slightly to the right to
remove the container from the vacuum cleaner.
2. Twist the filter to the right to remove it from the body of the vacuum.
3. Using the cloth tape, separate the HEPA cover and the HEPA filter and wash it with
cold water.
4. Reassemble the vacuum body once the filter is completely dry. Drying using electrical
items such as a hair dryer is not recommended.
CLEAN FLOOR BRUSH
Note: Make sure the vacuum is turned off when cleaning the floor brush.
1. Unlock the tab located on the side of the floor brush and open it as shown in the im-
age.
2. Rotate the floor brush cover and take out the roller.
E NGL I SH
10
CLEANING