Create Cyclone Force Manual De Instrucciones página 9

LOADING THE VACUUM
When the vacuum cleaner is charging, the display shows "GEAR" and the battery charge
status.
1. Place the vacuum cleaner near a power source in a suitable position to prevent falls
and damage.
2. Connect the machine to the charger and connect it to the power source.
3. When the power indicator lights up, charging will start.
4. The color of the power indicator will change according to the remaining power. You
can check the charge from the digital display.
5. When the vacuum cleaner is fully charged, the power indicator will turn off.
BATTERY STATUS INDICATOR
The color of the power indicator will change
according to the remaining battery percent-
age:
• Upon reaching the 70% battery level,
the color of the indicator will change
from blue to pink.
• When it reaches 40% of the battery it
changes to red.
• When the battery reaches 11%, the
screen flashes until the device turns off.
When charging, the battery indicator light will turn on and the control panel will indicate
the percentage of battery charged.
Charging time is approximately 2-3 hours.
Note: If the vacuum cleaner has no battery, pressing the power button will cause the red
light to flash.
WALL HOOK MOUNT
1. Choose a spot on the wall where you want
to mount the wall hook. Make sure it is
tall enough to support the vacuum con-
sidering its length.
2. With the help of a level, mark the points
where the holes for the screws and an-
chors will be drilled.
3. Place the wall hook over the drilled holes
and align the mounting holes with them.
Use screws to fix the wall hook in place.
4. Be sure to locate the wall hook near a
power source in order to charge.
5. For safety, check that the hitch is secured to the wall firmly and level. If necessary,
make adjustments to achieve the desired position.
6. Once securely anchored, place the vacuum on the hitch and check if the load works
properly.
100
100
E NGLI SH
9