Publicidad
Idiomas disponibles
Idiomas disponibles
Ermenrich Ping SM70 Stud Detector
EN
Please carefully read the safety instructions and the user manual before using this product. Keep away from children. Use the
device only as specified in the user manual.
The kit includes: stud detector, Type-C USB cable, carry bag, user manual, and warranty
Charging the device
This device uses a rechargeable polymer lithium battery. Connect the power cable (included) to the device and the DC adapter (not
included) via a USB plug and connect it to the AC power supply to charge the device.
Display information
Display icons
1
2
3
4
Getting started
Press the Power/Back button (4) and hold it for 3s to turn the device on/off.
Calibration must be done each time a new mode is selected.
Sensitivity setting
You can set the sensitivity in the three detection modes separately. Press the Set/+ button (8) to enter the menu. Select Sensitivity setting.
Press the Sound/– button (3) and the Set/+ button (8) to adjust the sensitivity level (high/middle/low), press the Metal detection/Confirm
button (6) to select the setting item, and press the Power/Back button (4) to return.
Metal detection mode
The metal detection mode is used for the detection of hidden objects made of ferrous and non-ferrous metals. The metal detection mode
is set by default.
Calibration
1.
Press the Set/+ button (8) to enter the menu. Select Metal detection calibration.
2.
Place the device flat against the target surface.
3.
Press the Metal detection/Confirm (6) button to start the calibration. The calibration will be carried out automatically. When the white
part of the display becomes dark, the calibration is completed.
4.
Remove the device from the surface and press Power/Back button (4) to exit the calibration mode
Usage
1.
Complete the calibration and place the device flat against the surface to be tested.
2.
Slowly move the detector across the surface in the direction you want to scan.
3.
When the device detects a metal object, the screen will display the icon
distance to the target, and the signal strength indication. The device will emit a sound. The closer the device is to the object, the stron-
ger the signal will be.
4.
When the signal is the strongest, the center mark (14) lights up. Move the device to locate the object according to the signal intensity.
!
If you're receiving erratic scanning results, it may be a result of humidity, moisture within the wall cavity or drywall, or recently
applied paint or wallpaper that isn't fully dried.
Stud detection mode
The device can scan the surface for wooden and/or metal studs.
Calibration
Automatic calibration
1.
Press the Stud detection button (7) to enter the stud detection mode.
2.
Place the device flat against the target surface.
3.
Press the Stud detection button (7) to start calibration. The calibration will be carried out automatically. When the white part of the
display becomes dark, the calibration is completed.
4.
Remove the device from the surface and press Power/Back button (4) to exit the calibration mode.
If the device does not search for wooden/metal objects after automatic calibration, you need to calibrate the device manually.
Manual calibration
1.
Press the Stud detection button (7) to enter the stud detection mode.
2.
Place the device flat against the target surface. When the display becomes dark, press the Stud detection button (7) to force the device
to calibrate.
3.
Slowly move the detector across the surface in the direction you want to scan. When the signal is the strongest, the center mark (14)
lights up.
4.
Remove the device from the surface and press Power/Back button (4) to exit the calibration mode.
Detection result
Non-ferrous metal
Ferrous metal
AC wire
Wooden/metal stud
Display icons
1
2
3
(non-ferrous metal) or
5
Mode
Stud detection
Metal detection
AC wire detection
(ferrous metal), the value of the
Publicidad
