Publicidad
Idiomas disponibles
Idiomas disponibles
SPECIFICATIONS
(all measurements @ 120 VAC, 60 Hz, Domestic—230 V Export)
Rated Output Power: (typical value)
Stereo Mode. Continuous Sine Wave
8 ohms, 1 kHz, 1%THD: 210 W RMS per channel
4 ohms, 1 kHz, 1% THD; 260 W RMS per channel
70 V line, 1 kHz, 0.1% THD; 200 W RMS per
channel, Domestic
100 V line, 1 kHz, 0.1% THD: 200 W RMS per
channel, Export
Bridge Mode. Continuous Sine Wave
8 ohms, 1 kHz, 1%THD: 520 W RMS
140 V line, 1 kHz, 0.1% THD; 400 W RMS,
Domestic
200 V line, 1 kHz, 0.1% THD: 400 W RMS, Export
Frequency Response: (typical value)
DC Protection Eliminated: Stereo Mode. 4 ohms
200 W RMS; +0 dB, -0.3 dB: 20 Hz to 20 kHz
1 W RMS;
+0
dB, -0.3 dB; 20 Hz to 20 kHz
Total Harmonic Distortion:
300 kHz Bandwidth Measurement: Stereo
(200 W RMS, 8 ohms)
20 Hz to 10 kHz; below 0.1% THD
(70 V line, 24 ohms)
20 Hz to 20 kHz; below 0.05% THD, Domestic
(100 V line, 50 ohms)
20 Hz to 20 kHz: below 0.05% THD, Export
300 kHz Bandwidth Measurement; Bridged
(480 W RMS, 8 ohms)
20 Hz to 10 kHz: below 0.1% THD
(140 V line, 400 W RMS, 48 ohms)
20 Hz to 20 kHz: below 0.05% THD, Domestic
(200 V line, 400 W RMS, 100 ohms)
20 Hz to 20 kHz; below 0.05% THD, Export
Intermodulation Distortion:
60 Hz. 7 kHz Mixed: 1 W RMS
Stereo, 8 ohms: below 0.05% THD
Stereo, 70 V line; below 0.05% THD, Domestic
Stereo, 100 V line; below 0.05% THD, Export
Signal-to-Noise Ratio:
Unweighted. 20 Hz to 22 kHz: FCW Attenuator
Setting
Stereo: below 100 dB
Bridge: below lOOdB
Slew Rate: (typical value)
Stereo, 4 ohms: 20 V/pS
Bridge, 8 ohms: 40 V/pS
Damping Factor: (typical value)
Stereo, 8 ohms; 1 kHz: 400
Bridge, 8 ohms; 1 kHz; 200
Input Impedance:
FCW Attenuator Setting
Balanced: 10 K ohms
Unbalanced: 10 K ohms
Input Sensitivity:
FCW Attenuator Setting
Rated power 260 W RMS, 4 ohms: 1 V RMS
70 volt constant, 24 ohms; 2 V RMS
100 volt constant, 50 ohms: 2.5 V RMS
Voltage Gain:
Stereo: 31 dB
Bridged: 37 dB
Dimensions & Weight:
Height:
3.5" (13.3cm)
Width:
19" (48.3cm)
Depth:
16" (43.2cm)
Weight:
48 lbs.
Protection Systems:
Thermal shutdown 100° C
Current/voltage limiting
DC sensing, triac clamp on output
Power Requirements:
Domestic: 120 VAC, 60 Hz, 7 A, 800 W
Export: 220-240 V AC, 50/60 Hz, 3.5 A, 800 W
A
Due to our efforts for constant improvements,
features and specifications listed herein are subject to change without notice.
Publicidad
