Glacier bay HDQFP1B4202CP Instrucciones De Instalación página 4

Installation
1
Installing the faucet assembly
□
Shut off the water supply. Remove the old faucet.
□
Clean the mounting surface.
□
Check for the proper thickness of the sink.
Without deck plate
1-1/2 in. (38 mm) Max Deck Thickness.
Ø 1-3/8 in. (35 mm) Min.
Ø 1-1/2 in. (38 mm) Max.
With deck plate
1 in. (25 mm) Max Deck Thickness.
Ø 1-3/8 in. (35 mm) Min.
Ø 1-1/2 in. (38 mm) Max.
2.b
Installing the faucet with
the deck plate
□
Place a bead of clear silicone sealant (not
included) around the base of the putty plate (D).
Place the putty plate (D) and the deck plate (C)
on the sink.
□
Rotate the two half-moon locking nuts (2) inward
before inserting the top mounting fixture (E) into
the sink.
□
Insert the top mounting fixture (E) into the sink.
2.a
Installing the faucet
without the deck plate
□
Rotate the two half-moon locking nuts (2) inward
before inserting the top mounting fixture (E) into
the sink.
□
Insert the top mounting fixture (E) into the sink.
D
4
E
(2)
C
E
(2)