HTW -VS-80FF Manual De Usuario página 9

FLOOR FAN HTW-VS-80FF
8. Do not operate the fan in an area where gasoline is used or stocked, painting or such flammable liquids.
9. If you need to move the fan, switch off and unplug it.
10. If you need maintenance, please send the fan back to the agent.
11. No part of this fan must be replaced by the user.
12. The fan should not be opened up by the user.
13. Be sure not to allow water or other liquid to enter the inside of motor.
14. The fan must be placed on a flat surface.
15. Need to check the power cord and plug is damaged regularly. If it's damaged, must replace the
power cord or plug by the manufacturer or a qualified expert agency to avoid hazards.
16. The appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given super-
vision or instruction concerning the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
RATING INSTRUCTIONS
1. Be surethe voltage of fan conforms with local power conditions before use.
2. Adjust the speed by pressing the switch: 0-Stop 1-Low 2-Medium 3-High.
3. Adjust the tilt angle by moving the fan guard.
WARNING
THIS APPLIANCE MUST BE EARTHED. CLEANING AND CARE INSTRUCTIONS:
a. Always unplug the fan before cleaning.
b. Do not allow water to drip on or enter the fan housing.
c. Be sure to use a soft cloth moistened with mild soap solution.
d. Do not use any of the following as cleaner, petrol, thinner, benzene.
e. Always clean with dry cloth. Ensure that the fan is switched off from the mains supply before
removing the guard.
SPECIFICATIONS
220-240V ~ 50 Hz 80W.
USER MANUAL
RATING INSTRUCTIONS

9