Makita BUB360 Manual De Instrucciones página 9

20. If the blower strikes any foreign objects or
should start making any unusual noise or vibra-
tion, immediately switch off the blower to stop it.
Remove the battery cartridge from the blower
and take the following steps before restarting
and operating the blower:
• inspect for damage,
• when the blower is damaged, have it repaired
by Makita Authorized Service Centers.
21. Switch off the blower and remove the battery
cartridge and make sure that all moving parts
have come to a complete stop
• whenever you leave the blower,
• before clearing blockages or unclogging chute,
• before checking, cleaning or working on the
blower,
• if the blower starts to vibrate abnormally, for
immediately check, or
• after striking a foreign object to inspect the
blower for damage.
22. Do not insert fingers or other objects into suc-
tion inlet or blower outlet.
23. Prevent unintentional
switch is in the off-position before inserting bat-
tery pack, picking up or carrying the blower. Car-
rying the blower with your finger on the switch
or energising the blower that has the switch on
invites accidents.
Maintenance and storage
24. When the blower is stopped for servicing,
inspection, or storage, or to change an acces-
sory, shut off the power source, remove the bat-
tery cartridge from the blower and make sure
that all moving parts come to a complete stop.
Cool down the blower before making any inspec-
tions, adjustments, etc. Maintain the blower with
care and keep it clean.
25. Store the blower in a dry place out of the reach
of children.
26. Always cool down the blower before storing.
27. Keep all nuts, bolts and screws tight to be sure
the blower is in safe working condition.
Battery tool use and care
28. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire
when used with another battery pack.
29. Use the blower only with specifically designated
battery packs. Use of any other battery packs
may create a risk of injury and fire.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this instruc-
tion manual may cause serious personal injury.
All manuals and user guides at all-guides.com
starting. Ensure the
IMPORTANT SAFETY INSTRUCTIONS
FOR BATTERY CARTRIDGE
1. Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using bat-
tery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
5. Do not short the battery cartridge:
(1) Do not touch the terminals with any conduc-
tive material.
(2) Avoid storing battery cartridge in a container
with other metal objects such as nails, coins,
etc.
(3) Do not expose battery cartridge to water or
rain.
A battery short can cause a large current flow,
overheating, possible burns and even a break-
down.
6. Do not store the tool and battery cartridge in
locations where the temperature may reach or
exceed 50 °C (122 °F).
7. Do not incinerate the battery cartridge even if it
is severely damaged or is completely worn out.
The battery cartridge can explode in a fire.
8. Be careful not to drop or strike battery.
9. Do not use a damaged battery.
10. The contained lithium-ion batteries are subject
to the Dangerous Goods Legislation require-
ments.
For commercial transports e.g. by third parties, for-
warding agents, special requirement on packaging
and labeling must be observed.
For preparation of the item being shipped, consulting
an expert for hazardous material is required. Please
also observe possibly more detailed national regula-
tions.
Tape or mask off open contacts and pack up the bat-
tery in such a manner that it cannot move around in
the packaging.
11. Follow your local regulations relating to disposal
of battery.
SAVE THESE INSTRUCTIONS.
CAUTION: Only use genuine Makita batteries.
• Use of non-genuine Makita batteries, or batteries that
have been altered, may result in the battery bursting
causing fires, personal injury and damage. It will also
void the Makita warranty for the Makita tool and
charger.
Tips for maintaining maximum battery life
1. Charge the battery cartridge before completely
discharged. Always stop tool operation and
charge the battery cartridge when you notice
less tool power.
ENC007-11
9