Publicidad
Idiomas disponibles
Idiomas disponibles
3. Roll the blower unit 90° so that fan blade openings are facing out the top of the
microwave.
4. Place the blower unit back into the opening.
CAUTION:
Do not pull or stretch the blower unit wiring. Make sure the wires are not pinched, and
that they are properly secured.
5. Secure blower unit to microwave with the screw removed in Step 1. Make sure the
screw is tight.
6. Replace blower plate with the screw removed in Step 1. Make sure the screw is tight.
Before Rotation
Back of
Microwave
AFTER: Fan Blade
Openings Facing Top
After Rotation
Back of
Microwave
Back of
Microwave
EN-29
Back of
Microwave
Publicidad
