Create Studio Manual De Instrucciones página 6

1. Place the popcorn maker on a firm, level surface.
2. Before first use, it is recommended to clean the machine and accessories with a damp
cloth.
3. Open the transparent cover and place a maximum of 100 grams of corn on the non-stick
plate.
4. Then put a little oil, butter, sugar or whatever else you want on the corn.
5. Put the transparent cover on the motor body.
6. Plug the power cord into the outlet and press the switch button. The stirring rod will rotate,
the corn will begin to heat up.
WARNING:
• Never turn on the popper before pouring the kernels of corn onto the hob.
• While the popcorn maker is in operation, never remove the transparent lid of the
appliance.
7. Around 3-4 minutes the corn will start to cook. The speed of cooking the corn will gradual-
ly speed up. Little by little the speed will decrease and the corn will be completely cooked.
8. Turn off the power button, and then disconnect the power cord from electricity.
NOTE: Cooking time varies depending on the amount of corn to be cooked.
9. Grasp the handles on the motor body and lid, turn the body and clear lid upside down until
the popcorn pops onto the lid.
10. Subsequently, remove the lid from the body of the product to remove the popcorn.
11. If you want you can add a little salt or sugar to the popcorn, the corn will be much sweeter
and more delicious.
12. Once the popcorn has finished cooking, keep the product out of operation for 15-20 min-
utes to cool down before the next use.
• Before cleaning, remove the plug from the mains.
• Make sure the popcorn maker has cooled completely before cleaning it.
• Clean the plastic parts of the popcorn maker with a damp cloth. Never use abrasive prod-
ucts as they could damage the machine.
• Do not use the dishwasher to clean any part.
• The top cover can be cleaned with warm soapy water. Dry it well after each cleaning.
• Turn center locks counterclockwise, remove stirring rod. Dry it after washing it with soapy
water.
• Dry the nonstick plate after cleaning with a soft cloth dampened with soapy water to clean
the surface.
• After repeated use, the surface may have some stains. To remove it, you can wipe the sur-
face with a soft cloth dipped in lemon juice or vinegar, and then dry after cleaning with a
soft cloth.
WARNING: Do not place the stand base, power cord, or plug in water or other liquids.
• When the popcorn maker is not in use, unplug it and store it in a safe, dry place, out of the
reach of children.
6 E NGL I SH
INSTRUCTIONS FOR USE
CLEANING AND STORAGE