Jackery Explorer 1000 Manual De Usuario página 7

GIVE YOUR APPLIANCES MORE RUN TIME
Note: The running time of the E1000 for the following equipment are tested in the
laboratory, which has strict controls on temperature, the working hours can also be
a ected by many other factors.The actual working time = 1002.24Wh* 0.85 / operating
power of your device.
CHARGING
Drone Motion Camera
(90W max)
RUN TIME
About
20 Recharges 180 Recharges
For inductive load devices:
•What is the inductive load device?
Inductive Loads, also called Lagging Loads or Inductive Load Banks or Inductive Reactive
Loads or Power Factor Loads, are AC loads that are predominantly inductive in nature so
that the alternating current lags behind the alternating voltage when the current flows into
the load.
•The inductive load device has an instant start power when the it runs. Typically
starting power is 3 times the amount of power to run the application.
•When you check if the E1000 can run the device, please kindly check if there is
an instant start power.
TROUBLESHOOTING
PROBLEM WITH INPUT (AC/DC)
When the power station has something wrong with input by using AC charger cable :
•Check if the charger cable and the power station are reliably connected; whether the
charger indicator light is on.
•Check if the original charger is used.
•Whether the charging indicator of the power station power supply is on and whether
the screen displays the charging power.
•Please try to use the provided car charging cable to charge to see.
This troubleshooting is also fit for DC input failure.
12''Mac book
(5W max) (30W)
RUN TIME RUN TIME
About About
12.5 Recharges
Smartphone
(18W max)
RUN TIME
About
100 Recharges
US
32"TV
(60W)
RUN TIME
About
14 Hours
05