Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY
SAFETY INSTRUCTIONS
DO NOT ATTEMPT TO OPERATE THE TOOL IF THE TOOL'S
OPERATING CONTROLS HAVE BEEN MODIFIED OR ARE NOT
WORKING PROPERLY.
Attempting to use a tool with modified or malfunctioning
trigger or workpiece contact can result in a fastener being
driven unintentionally.
USE CORRECT FASTENERS.
Only use the correct fastener for the tool. Using fasteners
with incorrect specifications can jam the tool or
cause serious injuries.
USE THE CORRECT FASTENERS FOR THE APPLICATION.
Using the wrong fasteners can cause the workpiece to split and
allow the fastener to fly free.
KEEP TOOL POINTED IN A SAFE DIRECTION WHEN
LOADING FASTENERS.
Never point the tool at yourself or anyone else when loading fasteners.
DO NOT LOAD TOOL WITH TRIGGER OR WORKPIECE
CONTACT DEPRESSED.
Depressing the trigger or workpiece contact during loading
can result in an unintentional fastener drive if both devices are
accidentally actuated at the same time.
KEEP FINGER OFF TRIGGER UNTIL TOOL IS IN POSITION TO
DRIVE A FASTENER.
An unexpected bump or sudden contact with your body or that
of a bystander can result in serious injuries.
AVOID DRIVING FASTENERS INTO KNOTS, ON TOP
OF OTHER FASTENERS, AT WORKPIECE EDGES, OR INTO
BRITTLE MATERIALS.
Driving fasteners into extremely hard materials, or driving into
workpiece edges, can cause fasteners to deflect away from the
workpiece. Flying fasteners can cause serious injuries.
6
Publicidad
