Contest VCOB-60DW Manual Del Usuario página 23

English
6.6 - Power supply booster :
To overcome the lack of power of the line or the voltage drop due to a long cable length, it is necessary to be able to boost the power supply.
To do this, you will need to use a junction box and separate the DMX coming out of the hybrid cable at the end of the line and isolate the power
supply. A new mains power supply can then be injected into one or more chains of projectors on hybrid connectors at the outlet of the box as
shown in the figure below.
architectural-lighting.eu
Distributed by HITMUSIC SAS
FRANCE
MADE IN CHINA
+45°C
1m -20°C
DMX/POWER IN
AC 100-240V 50/60Hz DMX/POWER OUT
MAX: 10A
FUSE: T3A/250V 120W
IN OUT
Booster power IN
16 A (3500W maxi)
CAUTION !
The sum of the powers of the different lines must
not exceed the power of the Power input (3500W).
The power per line is limited to the characteristics
of each of the devices, see table in the section on
chaining of projectors.
Hybrid
Power +
DMX IN
(Line output)
Booster
power IN
Page 8
VCOB-DW - Dynamic white COB LED architectural projectors IP66
L
N
D+
GND
D-
1x IpBox-p6 box
1x VC-Start/3 cable
3x VC-End1/3 cable
1x FastCon-1333POW
1x FastCon-1333DMX
L
N
D+
GND
D-
IP plug
architectural-lighting.eu
Distributed by HITMUSIC SAS
FRANCE
MADE IN CHINA
1m +45°C
-20°C
DMX/POWER IN
AC 100-240V 50/60Hz DMX/POWER OUT
MAX: 10A
FUSE: T3A/250V 120W
IN
architectural-lighting.eu
Distributed by HITMUSIC SAS
FRANCE
MADE IN CHINA
POWER IN +45°C POWER OUT
1m -20°C
DMX OUT
DMX IN
IN
3 x Hybrid
Power + DMX OUT
OUT
architectural-lighting.eu
Distributed by HITMUSIC SAS
FRANCE
MADE IN CHINA
POWER IN +45°C
1m -20°C POWER OUT
IN
DMX IN DMX OUT
OUT
OUT
CAUTION !
Outgoing power supply
OUT to be isolated from the
Booster power supply IN