GPI HP-100 Dual-Flo Guía De Solución De Problemas página 8

REPAIR ( CONTINUED )
Replace Anti-Siphon Valve
1. Remove the cap covering the anti-siphon vent (see Figure 8).
2. Unthread the anti-siphon vent and discard cap and vent (see Figure 8).
3. Thread the new anti-siphon vent into the opening, and tighten securely.
4. Press the cap over the new anti-siphon vent until well seated.
Anti-siphon Vent
Cap
Figure 8
8
EN